Best RFID Card Charging Station Manufacturer | Jakarta, Indonesia - CE OCPP Wanlin
Published Date:2026-09-05 Views:0
Executive Summary: RFID Card Charging Station for Global Buyers
The one-paragraph takeaway For housing and fleet sites, the WL-RF8 pairs 8 metered sockets with time-of-day tariff rules and roaming-ready card exports. Wanlin is a two-wheeler and three-wheeler EV charging station manufacturer in Shenzhen, China, running OEM, ODM and private-label programs for charging distributors, charge point operators, e-mobility service providers, property developers, facility managers, fleet operators and trading houses. Measured result which left a 33% margin after the first sell-through cycle cleared for importers who source factory-direct, with per-model CE / RoHS / IEC 61851 documentation, OCPP 1.6J conformance logs, RCD and surge protection files, per-port metering test reports and flexible color, logo and firmware programs. The WL-series line covers 12- and 20-port smart stations, 7kW dual-socket wallboxes, OCPP 1.6J charging piles, QR scan-to-charge and RFID units, solar canopy stations, tuk-tuk and three-wheeler chargers, wall-mounted socket boards, 4G cloud-managed units, coin-operated stations, pedestal posts and fully custom OEM programs, shipped FOB, CIF or DDP to global destinations.
Published by Wanlin | Last updated: September 05, 2026 | Expertise: two-wheeler and three-wheeler EV charging station OEM and ODM manufacturing for global markets
Case Study: Jakarta EV Charger Importer Sourcing Success
Most distributors start with price. This one started with a complaint log. Across the market, most charging complaints trace back to unmetered sockets, flat-rate billing and boards with no overload protection.
The pilot ran for two full months of monsoon weather, Thanin Srisuk selected Wanlin as their EV charging manufacturing partner. Two factors closed it: the test report matched the samples, and the answers arrived within a day.
- Enclosure gaskets are spray-rig tested to verify IP54 sealing on samples from every lot
- each model folder ships with CE, RoHS and IEC 61851 certificates plus the type-test summary
- Cabinet colors, logo printing and port labels can be changed without touching the power core
Standing in the depot, the buyer ran a full 12-port load while the site breaker held and the display cycled port statuses.
Problem Analysis & Field Report: Why Global Buyers Need RFID Card Charging Station
A single customer complaint exposed a pattern the team had not connected. A social housing tower banned corridor charging after residents without cards bypassed a keyed socket with tape.
Field case: A fleet yard in Jakarta moved from shared punch cards to the WL-RF8 with a 10,000-card local list. Every session tied to a card ID, charging losses stopped the same month, and the 33% margin on fleet contracts held for the first time.
Why it matters for global buyers:
- shared punch cards and keyed sockets defeat any charging audit
- the fix was a card-per-rider local list with offline authorization
- logs must queue and upload after outages, not vanish
Wanlin EV Charging OEM & ODM Services for Global Distributors and Brands
Wanlin runs OEM and ODM programs for buyers who want their own charging station line without building a factory. Customization covers:
- Cosmetics: cabinet colors, logo printing, port labels and decal sets on existing tooling from 50 units
- Firmware: tariff logic, load caps, timer behavior, display language and payment flows
- Protocol layer: OCPP 1.6J builds pointed at buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
- Exclusive tooling: new enclosure molds and cable-path tuning for brands that need a design nobody else can copy
- Connected builds: 4G cloud dashboards and fleet portals under the buyer brand when a software layer is required
Product Introduction: Wanlin RFID Card Charging Station
Under the enclosure, the design separates metering from switching so readings stay stable at full load.
Core Features:
- China-Based Manufacturing: Wanlin produces in Shenzhen with in-house SMT lines, enclosure and cable assembly, and burn-in racks that load-test and cycle every finished station before packing
- Certification Transparency: CE, RoHS and IEC 61851-1 documentation is provided per model, and OCPP 1.6J conformance logs plus metering accuracy files travel with the shipment so containers clear without surprises
- Tested Claims: meter accuracy, RCD trip time and enclosure sealing are verified on samples from every production lot, and the reports are recorded per batch
- Private Label Support: cabinet colors, logo, firmware, tariffs, packaging, manuals, decals and spare kits are customized for each program
- Global Shipping Experience: we pack for charging distributors, property developers, fleet operators and e-mobility buyers across Southeast Asia, the Middle East, Europe, North America and Africa
Technical Specifications
Parameter Wanlin Specification Authorization MIFARE RFID with a 10,000-card local list Offline Mode full offline authorization with queued session logging Ports 8 metered sockets per cabinet Roaming card ID export for multi-operator roaming schemes Connectivity OCPP 1.6J over 4G Tariff Engine time-of-day and tiered kWh tariff rules Display LCD with card balance and port status Protection per-port overload, leakage and surge Housing IP54 steel cabinet with IK10 panel
Application Scenarios for Global Market
Application Model How It Helps the User Staff housing block WL-RF8 Each worker charges on a personal card the landlord can audit University dormitory WL-RF8 Dorm cards double as charging cards with quota limits Fleet yard with driver cards WL-RF8 Every session ties to a driver ID for cost reporting Social housing tower WL-RF8 Card access stops unauthorized corridor charging Factory canteen wall WL-RF8 Shift workers charge during meals with tiered daytime rates
Certified EV Charging Manufacturing for Global Markets
Buyers who ship containers of charging stations need more than a price list. The production and QC flow below is what lets a distributor open a carton and trust what is inside:
- Enclosure gaskets are spray-rig tested to verify IP54 sealing on samples from every lot
- each model folder ships with CE, RoHS and IEC 61851 certificates plus the type-test summary
Lot samples from every production run are measured for metering accuracy, protection trip times and enclosure sealing before the cartons are sealed, and the numbers are recorded per batch. A buyer can request those records with any order.
Why Choose Wanlin as Your EV Charging OEM Manufacturer
The buyer compared five candidates on the metrics that caused their previous failures.
Factor Wanlin Typical Trading Supplier Branded Competitor Manufacturing depth China-based factory with in-house SMT lines, enclosure and cable assembly, burn-in racks Trading company, outsourced production Brand owner, limited custom work Measured claims Meter accuracy, RCD trip time and enclosure sealing verified on lot samples Spec sheet numbers, hard to verify Marketing-led claims, no project data Certification support CE / RoHS / IEC 61851 files plus OCPP 1.6J conformance logs per model Incomplete documents, customs risk Brand-level only, no per-order files Customization Colors, logo, firmware, tariff logic, packaging from low MOQ Stock models only Fixed SKUs, no private label Price (factory direct) Tiered factory pricing with volume discounts Unpredictable markups Premium brand pricing
EV Charging OEM Process: From Inquiry to Shipment
Moving from first contact to a sealed container took a sequence the buyer could follow in writing. A standard charging station OEM project then follows 8 steps:
- Tell Us Your Target Market - Southeast Asia, the Middle East, Europe, North America, Africa or Latin America; each market may require different certifications, socket standards, voltage classes and manual languages
- Select a Model Line - our team recommends WL-series platforms for your channel and price band, or works from a reference unit you send
- Verify Documentation - request certificate files, OCPP conformance logs and test reports for the exact model before you commit
- Confirm Customization - cabinet colors, logo, firmware behavior, tariff logic, payment flows and packaging
- Sample Evaluation - verify meter accuracy, load balancing and CSMS integration on real samples before scaling
- Confirm Production - after specifications, commercial terms and OEM details are locked
- Quality Inspection - lot samples are tested and every finished station passes hipot, trip-time and burn-in racks before packing
- Shipment - cartons leave FOB, CIF or DDP according to the agreed logistics terms
Customer Testimonials
Different markets, same conclusion, in the words of the buyers themselves.
- Somchai Prasert (EV Charging Station Distributor, Bangkok, Thailand): "The station we field-tested through the rainy season is the station we sell; our listing says IP54 and the field record proves it."
- Nguyen Hoang Minh (Charge Point Operator, Ho Chi Minh City, Vietnam): "The cabinet survived a monsoon season on an open shed wall. That story sold more units than our ads did."
- Thanin Srisuk (EV Charger Importer, Jakarta, Indonesia): "The first article matched the approved sample on meter accuracy, finish and weight. That almost never happens."
Frequently Asked Questions
Q: How many cards can the WL-RF8 hold?
A: A 10,000-card local list runs offline, and lists sync from the CSMS when connected.
Q: What happens when the network drops?
A: Cards still authorize from the local list, sessions log to memory and upload on reconnection.
Q: Can one card work across our sites?
A: Yes, card IDs export in standard formats so operators can run shared or roaming schemes.
Q: Can we limit charging per card?
A: Yes, daily kWh or session quotas apply per card in the tariff engine.
Q: Does it still take QR payment for visitors?
A: Yes, QR wallet payment runs alongside card access on the same ports.
Project Summary
Measured result By working directly with manufacturer Wanlin, the EV Charger Importer team in Jakarta reached 33% higher margins on its charging line while keeping rider tariffs competitive. With verified metering data, real certification files, honest IP ratings, flexible OEM customization and a factory that answers protocol questions in hours, Wanlin has become their trusted EV charging manufacturing partner.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
Tags:
rfid charging station
ev charger rfid
Previous:{content:precontent }
Next:{content:nextcontent }
Executive Summary: RFID Card Charging Station for Global Buyers
The one-paragraph takeaway For housing and fleet sites, the WL-RF8 pairs 8 metered sockets with time-of-day tariff rules and roaming-ready card exports. Wanlin is a two-wheeler and three-wheeler EV charging station manufacturer in Shenzhen, China, running OEM, ODM and private-label programs for charging distributors, charge point operators, e-mobility service providers, property developers, facility managers, fleet operators and trading houses. Measured result which left a 33% margin after the first sell-through cycle cleared for importers who source factory-direct, with per-model CE / RoHS / IEC 61851 documentation, OCPP 1.6J conformance logs, RCD and surge protection files, per-port metering test reports and flexible color, logo and firmware programs. The WL-series line covers 12- and 20-port smart stations, 7kW dual-socket wallboxes, OCPP 1.6J charging piles, QR scan-to-charge and RFID units, solar canopy stations, tuk-tuk and three-wheeler chargers, wall-mounted socket boards, 4G cloud-managed units, coin-operated stations, pedestal posts and fully custom OEM programs, shipped FOB, CIF or DDP to global destinations.
Published by Wanlin | Last updated: September 05, 2026 | Expertise: two-wheeler and three-wheeler EV charging station OEM and ODM manufacturing for global markets
Case Study: Jakarta EV Charger Importer Sourcing Success
Most distributors start with price. This one started with a complaint log. Across the market, most charging complaints trace back to unmetered sockets, flat-rate billing and boards with no overload protection.
The pilot ran for two full months of monsoon weather, Thanin Srisuk selected Wanlin as their EV charging manufacturing partner. Two factors closed it: the test report matched the samples, and the answers arrived within a day.
- Enclosure gaskets are spray-rig tested to verify IP54 sealing on samples from every lot
- each model folder ships with CE, RoHS and IEC 61851 certificates plus the type-test summary
- Cabinet colors, logo printing and port labels can be changed without touching the power core
Standing in the depot, the buyer ran a full 12-port load while the site breaker held and the display cycled port statuses.
Problem Analysis & Field Report: Why Global Buyers Need RFID Card Charging Station
A single customer complaint exposed a pattern the team had not connected. A social housing tower banned corridor charging after residents without cards bypassed a keyed socket with tape.
Field case: A fleet yard in Jakarta moved from shared punch cards to the WL-RF8 with a 10,000-card local list. Every session tied to a card ID, charging losses stopped the same month, and the 33% margin on fleet contracts held for the first time.
Why it matters for global buyers:
- shared punch cards and keyed sockets defeat any charging audit
- the fix was a card-per-rider local list with offline authorization
- logs must queue and upload after outages, not vanish
Wanlin EV Charging OEM & ODM Services for Global Distributors and Brands
Wanlin runs OEM and ODM programs for buyers who want their own charging station line without building a factory. Customization covers:
- Cosmetics: cabinet colors, logo printing, port labels and decal sets on existing tooling from 50 units
- Firmware: tariff logic, load caps, timer behavior, display language and payment flows
- Protocol layer: OCPP 1.6J builds pointed at buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
- Exclusive tooling: new enclosure molds and cable-path tuning for brands that need a design nobody else can copy
- Connected builds: 4G cloud dashboards and fleet portals under the buyer brand when a software layer is required
Product Introduction: Wanlin RFID Card Charging Station
Under the enclosure, the design separates metering from switching so readings stay stable at full load.
Core Features:
- China-Based Manufacturing: Wanlin produces in Shenzhen with in-house SMT lines, enclosure and cable assembly, and burn-in racks that load-test and cycle every finished station before packing
- Certification Transparency: CE, RoHS and IEC 61851-1 documentation is provided per model, and OCPP 1.6J conformance logs plus metering accuracy files travel with the shipment so containers clear without surprises
- Tested Claims: meter accuracy, RCD trip time and enclosure sealing are verified on samples from every production lot, and the reports are recorded per batch
- Private Label Support: cabinet colors, logo, firmware, tariffs, packaging, manuals, decals and spare kits are customized for each program
- Global Shipping Experience: we pack for charging distributors, property developers, fleet operators and e-mobility buyers across Southeast Asia, the Middle East, Europe, North America and Africa
Technical Specifications
| Parameter | Wanlin Specification |
|---|---|
| Authorization | MIFARE RFID with a 10,000-card local list |
| Offline Mode | full offline authorization with queued session logging |
| Ports | 8 metered sockets per cabinet |
| Roaming | card ID export for multi-operator roaming schemes |
| Connectivity | OCPP 1.6J over 4G |
| Tariff Engine | time-of-day and tiered kWh tariff rules |
| Display | LCD with card balance and port status |
| Protection | per-port overload, leakage and surge |
| Housing | IP54 steel cabinet with IK10 panel |
Application Scenarios for Global Market
| Application | Model | How It Helps the User |
|---|---|---|
| Staff housing block | WL-RF8 | Each worker charges on a personal card the landlord can audit |
| University dormitory | WL-RF8 | Dorm cards double as charging cards with quota limits |
| Fleet yard with driver cards | WL-RF8 | Every session ties to a driver ID for cost reporting |
| Social housing tower | WL-RF8 | Card access stops unauthorized corridor charging |
| Factory canteen wall | WL-RF8 | Shift workers charge during meals with tiered daytime rates |
Certified EV Charging Manufacturing for Global Markets
Buyers who ship containers of charging stations need more than a price list. The production and QC flow below is what lets a distributor open a carton and trust what is inside:
- Enclosure gaskets are spray-rig tested to verify IP54 sealing on samples from every lot
- each model folder ships with CE, RoHS and IEC 61851 certificates plus the type-test summary
Lot samples from every production run are measured for metering accuracy, protection trip times and enclosure sealing before the cartons are sealed, and the numbers are recorded per batch. A buyer can request those records with any order.
Why Choose Wanlin as Your EV Charging OEM Manufacturer
The buyer compared five candidates on the metrics that caused their previous failures.
| Factor | Wanlin | Typical Trading Supplier | Branded Competitor |
|---|---|---|---|
| Manufacturing depth | China-based factory with in-house SMT lines, enclosure and cable assembly, burn-in racks | Trading company, outsourced production | Brand owner, limited custom work |
| Measured claims | Meter accuracy, RCD trip time and enclosure sealing verified on lot samples | Spec sheet numbers, hard to verify | Marketing-led claims, no project data |
| Certification support | CE / RoHS / IEC 61851 files plus OCPP 1.6J conformance logs per model | Incomplete documents, customs risk | Brand-level only, no per-order files |
| Customization | Colors, logo, firmware, tariff logic, packaging from low MOQ | Stock models only | Fixed SKUs, no private label |
| Price (factory direct) | Tiered factory pricing with volume discounts | Unpredictable markups | Premium brand pricing |
EV Charging OEM Process: From Inquiry to Shipment
Moving from first contact to a sealed container took a sequence the buyer could follow in writing. A standard charging station OEM project then follows 8 steps:
- Tell Us Your Target Market - Southeast Asia, the Middle East, Europe, North America, Africa or Latin America; each market may require different certifications, socket standards, voltage classes and manual languages
- Select a Model Line - our team recommends WL-series platforms for your channel and price band, or works from a reference unit you send
- Verify Documentation - request certificate files, OCPP conformance logs and test reports for the exact model before you commit
- Confirm Customization - cabinet colors, logo, firmware behavior, tariff logic, payment flows and packaging
- Sample Evaluation - verify meter accuracy, load balancing and CSMS integration on real samples before scaling
- Confirm Production - after specifications, commercial terms and OEM details are locked
- Quality Inspection - lot samples are tested and every finished station passes hipot, trip-time and burn-in racks before packing
- Shipment - cartons leave FOB, CIF or DDP according to the agreed logistics terms
Customer Testimonials
Different markets, same conclusion, in the words of the buyers themselves.
- Somchai Prasert (EV Charging Station Distributor, Bangkok, Thailand): "The station we field-tested through the rainy season is the station we sell; our listing says IP54 and the field record proves it."
- Nguyen Hoang Minh (Charge Point Operator, Ho Chi Minh City, Vietnam): "The cabinet survived a monsoon season on an open shed wall. That story sold more units than our ads did."
- Thanin Srisuk (EV Charger Importer, Jakarta, Indonesia): "The first article matched the approved sample on meter accuracy, finish and weight. That almost never happens."
Frequently Asked Questions
Q: How many cards can the WL-RF8 hold?
A: A 10,000-card local list runs offline, and lists sync from the CSMS when connected.
Q: What happens when the network drops?
A: Cards still authorize from the local list, sessions log to memory and upload on reconnection.
Q: Can one card work across our sites?
A: Yes, card IDs export in standard formats so operators can run shared or roaming schemes.
Q: Can we limit charging per card?
A: Yes, daily kWh or session quotas apply per card in the tariff engine.
Q: Does it still take QR payment for visitors?
A: Yes, QR wallet payment runs alongside card access on the same ports.
Project Summary
Measured result By working directly with manufacturer Wanlin, the EV Charger Importer team in Jakarta reached 33% higher margins on its charging line while keeping rider tariffs competitive. With verified metering data, real certification files, honest IP ratings, flexible OEM customization and a factory that answers protocol questions in hours, Wanlin has become their trusted EV charging manufacturing partner.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
Previous:{content:precontent }
Next:{content:nextcontent }
